SawKit: Cut List Optimizer

About

SawKit works out how to cut your parts from full sheets of plywood, MDF or melamine with the least waste — and then tells you the order to make the cuts in. Type your cut list the way you'd say it. 15 3/16. 3/4". 4' 6". Millimetres if that's your shop. SawKit reads all of it, and a unit written on a number always wins, so you can mix imported hardware into a metric project without doing sums. WHAT IT DOES • Works out the layout across as many sheets as it takes, and picks the best of twelve different packing strategies for your particular list. • Respects the grain. Say which way it runs on the sheet and on the part, and parts that must follow it are turned to match — never guessed from which number you typed first. • Accounts for the blade. Kerf and edge trim are part of the calculation, not an afterthought. • Gives you the cut order. Every pass runs edge to edge across the piece in your hands, numbered, so you can work through it at the saw. • Prints. A page per sheet plus a shopping list with prices and a total, in black and white that survives a workshop printer. • Runs on iPad, iPhone and Mac, side by side or one at a time. • Works with no signal at all. Workshops are usually the worst room in the building for that. FREE INCLUDES Everything above on screen: the whole calculation, the drawing, and the calculators. Up to 25 parts, three projects and one kind of stock. PRO ($24.99, one payment) Unlimited parts, projects and stock. PDF export and printing. The cut order. Your own stock list with prices. Your projects on every device you own. SHOP CALCULATORS — always free Board feet with cost. Purchase allowance, done properly: waste comes out of what you buy, not what you need, so 15% waste means buying about 18% more — not 15%. Project cost with markup. PRIVACY Nothing is collected. No account, no analytics, no tracking, no server. Your cut lists are yours and they stay on your devices.