Chart standing · US
What changed · US
Listing changes AppTracker has observed for this app in this storefront — new versions, price moves, rating shifts, and store copy.
This update sharpens measurement accuracy: • Corrected the IEEE 1789-2015 pass/fail threshold to match the standard's published Recommended Practice, so compliance verdicts are now accurate across the full frequency range. • More precise flicker-frequency detection, with rejection of slow ambient light drift. • Steadier frame-rate estimation for more consistent readings. • Honest, clearly-labeled measurement uncertainty in reports. Custom pass/fail thresholds you set in Settings are now applied to the on-screen verdict, saved measurements, and reports.
About
Your new LEDs shouldn't be giving you headaches. If they are, the lights are almost certainly flickering — faster than your eyes can consciously detect, but fast enough to trigger migraines, eye strain, and fatigue. FlickerSpec turns your iPhone into a flicker meter, using the 240fps camera to measure exactly what your eyes can't. For compliance documentation — clinical engineering, facility management, EU Ecodesign certification — FlickerSpec generates PDF reports with IEEE 1789 and IEC PstLM verdicts that satisfy accreditation surveyors and lighting auditors. WHAT YOU MEASURE Quick Measurement (Free) Live 240fps capture with real-time results: • Dominant flicker frequency in Hz • Percent Flicker and Flicker Index per IEEE 1789-2015 • Signal-to-noise ratio and confidence rating • IEEE 1789-2015 Pass/Fail verdict • Live luminance waveform and FFT spectrum IEC Certified Measurement (Pro) 3-minute tripod capture for compliance documentation: • Short-Term Flicker Severity (PstLM) per IEC TR 61547-1:2015 • EU Ecodesign 2019/2020 PASS/FAIL (threshold: PstLM ≤ 1.0) • 8× oversampled LM flickermeter validated against all 5 IEC Table A.1 test vectors • Suitable for clinical engineering and lighting audit documentation Measurement Logging & PDF Reports (Pro) Every audit, documented: • Save measurements with GPS location, fixture photo, and notes • Single-measurement and session-summary PDF reports • PstLM + EU Ecodesign section included when applicable • Calibration certificate reference on every report • CSV export for spreadsheet workflows Calibration System (Free) Verify accuracy before any audit: • Built-in calibration web app generates a known-frequency reference signal • Point your iPhone at any screen showing the calibration page • Timestamped calibration certificate attached to all subsequent reports MEASUREMENT BANDWIDTH 240fps camera capture (Nyquist: 120 Hz) measures mains-driven LED flicker reliably: • 60 Hz flicker (half-wave LED drivers, US) — full accuracy • 120 Hz flicker (full-wave rectified, US) — frequency reliable; use the 3-min IEC flow for stable depth measurements • Above 120 Hz PWM and kHz drivers — outside camera bandwidth NO SUBSCRIPTIONS $49.99 one-time purchase unlocks everything: IEEE 1789 verdicts, IEC Certified Measurement, unlimited logging, PDF reports, CSV export, calibration certificates, report header customization with your company name and logo. Free tier: full live measurement display, frequency and metrics readout, up to 5 measurements per day — enough to check any room. Privacy Policy: https://flickerspec.slick-engineering.workers.dev/privacy Terms of Use: https://flickerspec.slick-engineering.workers.dev/terms
What's new · 1.4.0
This update sharpens measurement accuracy: • Corrected the IEEE 1789-2015 pass/fail threshold to match the standard's published Recommended Practice, so compliance verdicts are now accurate across the full frequency range. • More precise flicker-frequency detection, with rejection of slow ambient light drift. • Steadier frame-rate estimation for more consistent readings. • Honest, clearly-labeled measurement uncertainty in reports. Custom pass/fail thresholds you set in Settings are now applied to the on-screen verdict, saved measurements, and reports.
Details