SWLtools
Stefano Rampazzo · Utilities
Independent analytics for this App Store listing. AppTracker is not affiliated with Stefano Rampazzo.
Chart standing · US
What changed · US
Listing changes AppTracker has observed for this app in this storefront — new versions, price moves, rating shifts, and store copy.
LISTEN WHILE YOU DECODE • The monitor now works with any USB audio adapter. The inexpensive ones play the receiver through their own headphone socket; a two-channel interface can still send it to the iPhone speaker. • Switch the monitor on once, in the Audio tab, and it stays on as you move around the app: record, or decode CW, RTTY, WEFAX and ACARS, while you keep listening. The IQ tab pauses it and gives it back when you leave. CLEARER DIAGNOSTICS • The audio diagnostics panel opens with what matters most: whether you are listening to your receiver or to the phone's own microphone. • Adapters that iOS does not label as USB audio are now recognised as the dongles they are, and the panel shows how iOS identifies each one. • The test buttons show which audio path is running. ALSO • Unplugging or swapping the adapter while the app is open no longer makes it quit. • Leaving the app during a recording now closes and saves the file, so the recording can no longer be lost if the app is closed afterwards. • Help pages updated to match. • SWLstation, the iPad companion app, now listed alongside SWList.
In-app purchases · US
No in-app purchases.
Screenshots
Similar apps
Competitors and close alternatives, as estimated by AppTracker.
About
SWLtools: The Companion for Shortwave Listening Enthusiasts SWLtools is an app designed specifically for Shortwave Listening (SWL) enthusiasts who want to enhance their listening experience. It records what you hear, shows you the band, and reads the digital modes that carry text on the air. Whether you are a hobbyist or a dedicated DXer, SWLtools supports your activity from the antenna to the logbook. DECODING THE ON-AIR TEXT MODES Point the app at a signal and it turns it into readable text. - Morse (CW). The app follows the tone by itself and measures the sending speed from the signal, so it keeps up with hand-sent Morse as well as machine-sent. A side panel collects the callsigns it has heard, and each transmission starts on its own line when the operator hands over. - RTTY, in both ITA2 and SITOR-B. - Weather fax (WEFAX). The chart builds up line by line as it arrives, and can be saved straight to your photo library. - ACARS aircraft messages, with the ones carrying a position shown on a map. Decoded text can be saved, reopened later and shared. All times, on screen and in the saved files, are UTC — the way radio logs are kept. SPECTRUM AND WATERFALL If your receiver provides an IQ output, SWLtools displays the real-time spectrum and spectrogram. Visually explore the bands and gain deeper insight into the signals you are receiving. Where the two channels of a USB adapter do not arrive perfectly in step — a common trait of audio codecs — a sample-delay correction removes the mirror image that would otherwise appear beside every signal. AUDIO RECORDING AND STORAGE Easily record and store audio directly from your receiver. Capture signals from around the world and listen to them again whenever you want, or turn a recording into a video to share. OPTIMIZED FOR THE BELKA RECEIVER SWLtools was designed to work seamlessly with the Belka receiver. It is the perfect companion for outdoor listening sessions, letting you record your DX, explore frequencies with the spectrum view, or read a weather fax from the field. The app is optimized for low power consumption when displaying the spectrum and waterfall, making it ideal for portable use. REQUIREMENTS To use SWLtools you need an inexpensive USB audio adapter (ADC/DAC) connected to your iOS device. These affordable dongles typically provide a microphone input and a headphone output, which is enough to record, to decode, and to show a single-channel spectrum. A two-channel audio interface does more: it carries a true I/Q pair, so the spectrum shows the full band above and below the tuned frequency, and it is the only kind that can play the receiver's audio through the iPhone speaker while you listen. The app tells you which class of device you have connected and what it allows, and an audio diagnostics panel shows exactly what iOS is doing with the signal if something does not sound right. Note: please make sure your receiver is compatible with the app's features and that you have the required accessories for optimal performance.
What's new · 1.4.1
LISTEN WHILE YOU DECODE • The monitor now works with any USB audio adapter. The inexpensive ones play the receiver through their own headphone socket; a two-channel interface can still send it to the iPhone speaker. • Switch the monitor on once, in the Audio tab, and it stays on as you move around the app: record, or decode CW, RTTY, WEFAX and ACARS, while you keep listening. The IQ tab pauses it and gives it back when you leave. CLEARER DIAGNOSTICS • The audio diagnostics panel opens with what matters most: whether you are listening to your receiver or to the phone's own microphone. • Adapters that iOS does not label as USB audio are now recognised as the dongles they are, and the panel shows how iOS identifies each one. • The test buttons show which audio path is running. ALSO • Unplugging or swapping the adapter while the app is open no longer makes it quit. • Leaving the app during a recording now closes and saves the file, so the recording can no longer be lost if the app is closed afterwards. • Help pages updated to match. • SWLstation, the iPad companion app, now listed alongside SWList.
Details